RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
44
FCC. IC. CE and TELEC Module Model Identification
The RW8300E-a-PR module family is FCC Part 15 and IC (Industry Canada) certified.
The RW8300E-a-PR is also CE. TELEC marked. The modules are labeled with the
appropriate RW8300E-a-PR module model number and FCC Part 15 ID. IC registration
number and CE mark. The label can be found on top of the metal shielding on the
RW8300E-a-PR Module.
※
The first 6 digits of MAC#0034F1 is fixed.
※
The 7th digits of MAC# represent the model. “8” is RW8300E. and “9” is RW8300E-NL.
※
For paired products. the last 5 digits are the same.
Important Regulatory Compliance and User Information
The final product with the modules installed needs to be tested for FCC Part 15. IC
(Industry Canada) CE. EMI/RF compliance. Radicom certification documentation will help
streamline the final product approval process. Contact Radicom for more information. To
maintain compliance in the finished product. carefully follow guidelines in this section.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users.
2) The transmitter module may not be co-located with any other transmitter or
antenna. As long as the two conditions above are met. further transmitter testing will not
be required. However. the OEM integrator is still responsible for testing their end product
for any additional compliance requirements required with the module installed (for
example. digital device emissions. etc).
