RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
17
Connection Process of RW8300E-a-PR
Setup RW8300E connection
This session details a method to set up RW8300E connection.
※
Please make sure RW8300E is at default settings. you can refer chapter “WPS/RESET
Button on RW8300E-a-PR (USB-Device)” on page 15.
1. Ensure the router operates via the RJ45 Ethernet:
Connect RJ45 Ethernet cable from your computer to the Internet router to make
your computer access to Internet via the RJ45 connection.
Ensure the router accepts RJ45 and test the connection
2. Once the Internet connection between computer and router is confirmed.
remove the computer and re-connect RW8300E and router with the same
RJ45 Ethernet cable.
Connect Ethernet between RW8300E and router
3. Plug the USB power adapter into USB connector on the RW8300E.
4. Wait approximate one minute for booting to complete and the LED flashes at a 2
seconds rate.
