6. Connect one of the main connection
cables (No. 11/12) of the Radical device
(No. 1) to the Quadlock/ISO connector
of the car and close its locking
mechanism. Following this, connect the
CAN bus interface (No. 14) to the main
connection cable. Connect all the cables
to the Radical device (No. 1) those
previously run in the radio slot, and the
original antenna cables.
7
.
Neatly arrange the wires to the side,
making room for the Radical device.
Carefully slide it into the radio slot. Push
back the R-C11AD1 until you hear the
clicking sound of the latching
mechanism.
The installation of your R-C11AD1 is
now complete.
