EXAMPLE OF INSTALLATION GOLF VI
REMOVAL WORK AND PREPARATION:
1. Gently lift the trim frame starting on
the right side of OE device. Use the
supplied plastic removal tool for this
step.
2. Set the prying tool anticlockwise
around the trim frame, to release it
from the console. The trim frame
should come off of the console
completely. Unscrew and remove the
four Torx screws (T25) of the original
device.
3. Remove the original device by pulling
it out of the radio slot. Disconnect all
the cables from its backside.
Summary of Contents for R-C10VW1
Page 1: ......
Page 7: ...ANSCHLUSSSCHEMA...
