INSTALLATION
2. Install the GPS antenna (No. 2) in a
suitable position, making sure that the GPS
reception is not adversely affected by
unwanted shielding of metallic vehicle parts
(thermal insulation glazing, etc.). Then route
the connection cable into the radio bay.
2. Route the USB extension cable´s (No. 5,
6) from the radio bay to your preferred
position.
3. Connect one of the main connection
cables (No. 11) of the Radical device (No. 1)
to the Plug connector of the car and close its
locking mechanism. Following this, connect
the CAN bus interface (No. 12) to the main
connection cable. Connect all the cables
inside the radio bay and the original antenna
cables.
Summary of Contents for R-C10FD2
Page 1: ......
Page 6: ...ANSCHLUSSSCHEMA ...
