INSTALLATION
5.
Install the GPS antenna (No.
2) in a suitable position, making sure that
the GPS reception is not adversely affected
by unwanted shielding of metallic vehicle
parts (thermal insulation glazing, etc.).
Then route the connection cable into the
radio bay.
6.
Route the USB extension
cable´s (No. 5, 6) from the radio bay to
your preferred position.
7.
Connect the main harness (#
11) of the Radical device (# 1) to the plug of
the
vehicle
and
close
the
locking
mechanism of the connector. Then connect
the CAN bus interface (No. 12) to the main
harness. Connect all cables previously
routed in the radio slot and the original
antenna cables to the Radical unit (# 1).
Summary of Contents for R-C10BM5
Page 1: ......
Page 7: ...ANSCHLUSSSCHEMA...
