In Manual mode, the fan will not automatically adjust based on the built-in IAQ sensor.
Viewing device information
Hold the Mode button (
) on the control panel for 10 seconds or press the Mode button (
) on the
remote control once to display the Reactor Chamber runtime (hours). After a few seconds, the current fan
speed will display.
Hold the Mode button (
) on the control panel for five seconds or press the Mode button (
) on the
remote control twice to display the particulate matter sensor count (µg/m3). After a few seconds, the fan
speed will display.
Lock the control panel (child lock)
Hold the Power button (
) on the control panel for five seconds to lock the control panel.
While the control panel is locked, the control panel buttons will be inactive. However, the remote control can
still be used to change the device settings.
To unlock the buttons, hold the Power button on the control panel for another five seconds.
Set the timer
The VK Air has a timer that can be set for three, six, or nine hours, after which time the device will power
off.
Select a timer setting by pressing the Time – (
) or Timer + button (
) on the remote control. The
display will show the following to indicate which timer setting has been selected:
No timer/ cancel timer Device will continue to operate
Sets timer for 3 hours Device will switch off after 3 hours
Sets timer for 6 hours Device will switch off after 6 hours
Sets timer for 9 hours Device will switch off after 9 hours
Radic8
VK Air - 1_en
Copyright © 2022 Radic8
Page 20 of 37
