RS-125/230 User Manual
– Revision 1.05
PC CONNECTIONS
Radiation Solutions Inc
– Proprietary
Page 39
Revision Date: December 11, 2015
SPECTRUM DISPLAY
Click on any of the spectral data (denoted by an “
S
”) and the full 1024 channel spectrum is seen.
The cursor can be used to see Channel #, keV and cts for any channel in the spectrum. The
spectrum can also be vertically scaled using the buttons and a LOG button permits easier viewing
of higher energy low count rate events
This display has 5 tabs:
SPECTRUM
– spectral display of the selected point
ASSAY
– Assay data of the selected point
GPS
– GPS data of the selected point
INFORMATION
– gives additional data
CALIBRATION
– gives the full cal matrix of the selected data point
Now this Comments ability is added, to insert data click the left pen icon (ADD
– the one with a
red mark is REMOVE). The position the cursor at the data point of interest and click it.
Immediately data box will appear and the user can add comments (e.g. near Waterfall).
Comments are seen as shown:
If the blue
i
is clicked, then users can enter info in the
Comment field created above (e.g.
test data
) and this will
appear next to the
i
button to permit users to label the data.
D-1009 REV 01.05 Status: RELEASED printed 18/12/2015 5:26:09 PM by Radiation Solutions Inc.
