Before the measurement, please make sure the selected button
accords with the measured position.
TH005 Multi-function Infrared Thermometer
Functions
Real Time Clock
The real time clock will be recorded with the memory function and help you to recognize each
measurement result. (It includes the 12/24 Format_Hour_Minutes_Date.)
→
→
→
→
Please see the “Real time clock setting” section to learn how to setup the time in the first use.
Room Temperature
Suitable ambient temperature is important for the baby and patient, the thermometer always help you
recognize the room temperature.
→
→
→
→
Setting “Real time clock” first to enable this function. After power off, room temperature will be shown
on the screen with
icon.
→
→
→
→
Please see the “Use of the thermometer” section to learn how to get the correct room temperature.
Forehead / Ear
Temperature
The thermometer has been designed for practical use. It’s not meant to replace a visit to the doctor.
Please also remember to compare the measurement result to your regular body temperature.
→
→
→
→
Please see the “Use of the thermometer” section to learn how to measure the body temperature.
Surface Mode
The surface mode shows the actual, unadjusted surface temperatures, which is different from the body
temperature. It can help you to monitor if the object temperature is suitable for the baby or patient, for
example the baby’s milk.
→
→
→
→
Please see the “Use of the thermometer” section to learn how to measure the object temperature.
Stopwatch
The thermometer built the stopwatch function to help you to monitor the heartbeat since heartbeat is one
of the healthy indexes for people.
→
→
→
→
Please see the “Use of the Stopwatch” section to learn how to measure the heartbeat result.
Fever Alarm
If thermometer detects a body temperature
≧
37.5°C under ear and forehead mode, there will be a long
beep sound followed by three short beep sound to warn the user for potential fever.
Memory Locations
There are total 9 sets memories for ear and forehead measurements. Each memory also records the
measurement date/time/mode icon.
→
→
→
→
When in power on, Press the “ON/MEM” button to see the temperature stored with
icon.
°C / °F Switch
→
→
→
→
In “power off” mode (The LCD only shows the date, time and room temperature). Press and hold the
“Ear” button, then immediately press and hold the “ON/MEM” button for 3 seconds. After 3 seconds, icon
“°C” will be switched to icon “°F”. (You may use the same way to switch back to “°C”)
Real time clock setting
1.
Power on: Press the “ON/MEM” button. The thermometer is ready for use after hearing two beep sounds.
2.
Press and hold the “ON/MEM” button for 5 sec. When you see the Set icon starts flashing, it indicates that you are in the setting screen.(see the following figure.)
3.
Press the “Forehead” button to make the “24” icon flash. This indicates that you are in the 12/24-hour setting screen. Press the “Forehead” button to set 12/24-hour
Format from “24”(24-hour) to “12”(12-hour).
4.
Press “ON/MEM” button to move the flashing in the sequence shown below to select our settings:
hour
→
→
→
→
minutes
→
→
→
→
year
→
→
→
→
month
→
→
→
→
day
→
→
→
→
leave the setting screen.
5.
While the hour, minutes, year, month, day setting is flashing, use “Forehead” button to change it.
Use of the thermometer
1. Always make sure the probe is clean, and without damage.
2. Power on: Press “ON/MEM” button.(see figure 1)
3. Mode selection:
3.1
Ear mode
:Press the “Ear” button, you can get the body temperature by ear measurement after
hearing two beep sounds. (see figure 1)
Specifications
Temperature measurement range:
Forehead / Ear mode: 34~42.2°C (93.2~108°F),
Surface mode: -22~80°C (-7.6~176°F)
Operating temperature range: 10~40°C (50~104°F)
Storage temperature range: It should be stored at room temperature between
-20~+50°C, RH
≦
85%
Transportation temperature shall be less than 70°C, RH
≦
95%
Comply with ASTM E1965-98, EN12470-5:2003 Clinical thermometers-Part
5:Performance of infra-red ear thermometers(with maximum device),
IEC/EN60601-1-2(EMC),IEC/EN60601-1(Safety) standards.
Accuracy:
For ear mode: +/-0.2°C (0.4°F) within 35.5~42°C (95.9~107.6°F),
+/-0.3°C (0.5°F) for other range.
For forehead mode: +/-0.2°C (0.4°F) within 36~39°C (96.8~102°F),
+/-0.3°C (0.5°F) for other range.
For surface mode: +/-0.3°C (0.5°F) within 22~42.2°C (71.6~108°F),
/-4% or +/-2°C (4°F) whichever is greater.
Fever alarm & Memory locations under “Ear/Forehead mode” (with each measurement
date/time/mode icon)
Real time clock, °C / °F Switch mode
Battery: one lithium cell battery (CR2032 *1pcs)
This thermometer converts the ear/forehead temperature to display its “oral equivalent.”
There is no gender and age limitation for using infrared thermometer.
This is not an AP
or APG product.
Do not use this device for Live & Dead decision or Safety related applications.
Please consult with doctor if you have health concerns.
Figure 1 Figure 2 Figure 3 Figure 4
