TS8100W-25A Thermostat Instructions
ver 1.2
See overleaf for further setting up information
Page1
LCD symbols
Symbol
Event
The buttons are locked
Heating is turned on
Frost protection activated
Program number
Symbol
AUTO
Err
Automatic mode,
executes the programmed schedules
Event
Temporary temperature override
Economy temperature
The floor sensor is not being read by the thermostat
Configuration Menu
To enter into the setting menu please follow the steps below:
Step 1
, Turn the thermostat off by pressing ;
Step 2
, Press
, you will then see menu 01.
Step 3
, Use the up and down arrows to adjust the “sensor selection” which is Menu 01(Air sensing, Air and Floor, or Floor only)
Step 4
, Press
to move to the next Menu and once you have all the menu options set,
Setp 5
, Press
to accept and store.
Menu # Feature
Explanation
Adjustment
（
press up & down buttons to adjust
）
01
Mode/Sensor selection
This thermostat is a combination model which allows you to
choose 3 different modes.
A mode=Air Sensing Only(Has built in sensor)
AF mode=Air & Floor sensing(Floor probe must be installed)
F mode=Floor Sensing(Floor probe must be installed)
A, AF, F
02
03
Maximum Floor Temp
( AF mode only)
This is to protect the floor surface.
20 °C~ 40 °C (40 °C by default)
5+2 / 7 Day Mode
This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
time or 7 days separately
01 = 5+2 day programmable
02 = 7 day programmable
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
on time. To set follow the steps below:
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
Press
to move to the Day setting and use the up and down arrows to get to the correct day.
Press
to store and exit.
Override
NEXT
MENU
POWER
DONE
1
2
3
NEXT
DONE
Comfort temperature
Manual mode
LCD SYMBOLS
CONFIGURATION MENU
SETTING THE CLOCK + DAY OF THE WEEK
TS8100W-25A THERMOSTAT INSTRUCTIONS
See overleaf for further instructions >>>
Radiant Australia Pty Ltd
Unit 1 / 18 Profit Pass, Wangara, WA 6065
Telephone:
08 9302 4140
Fax:
08 8490 2343
Email:
