The buttons are locked
Turning on/off the thermostat
Heating is turned on
Automatic mode,
executes the programmed schedules
The sensor is not being read by the thermostat
Err
Temporary temperature override
Frost protection activated
Room temperature
RT
AUTO
Floor temperature
FT
O / RIDE
Symbols
The program number
Day of the week. Day 1= Monday, Day 2= Tuesday... etc.
Reminding the user to connect the floor sensor (AF and F model only)
Touch to view floor temperature for 5 seconds (AF model only)
Touch to switch among Auto
Touch to start programming of your thermostat
Comfort temperature mode
Economy temperature mode
Day
Program 1,2,3,4
Vacation temperature mode
Symbols Description
Description
Set
Schedule
Heating
Mode
TS8100-TH-H Thermostat Instructions
ver 1.2
LCD symbols
Configuration Menu
To enter into the setting menu please follow the steps below:
Step 1
, Turn the thermostat off by pressing ;
Step 2
, Press
, you will then see menu 01.
Step 3
, Use the up and down arrows to adjust the “sensor selection” which is Menu 01(Air sensing, Air and Floor, or Floor only)
Step 4
, Press
to move to the next Menu and once you have all the menu options set,
Setp 5
, Press
to accept and store.
Menu # Feature
Explanation
Adjustment
（
press up & down buttons to adjust
）
01
Mode/Sensor selection
This thermostat is a combination model which allows you to
choose 3 different modes.
A mode=Air Sensing Only(Has built in sensor)
AF mode=Air & Floor sensing(Floor probe must be installed)
F mode=Floor Sensing(Floor probe must be installed)
A, AF, F
02
03
Maximum Floor Temp
( AF mode only)
This is to protect the floor surface.
20 °C~ 40 °C (40 °C by default)
5+2 / 7 Day Mode
This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
time or 7 days separately
01 = 5+2 day programmable
02 = 7 day programmable
Setting the clock and day of the week
NEXT
MENU
POWER
DONE
Select the required operating mode
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start on time. Follow below steps,
1) Touch time display.
Auto - Automatic mode, the thermostat executes the preprogrammed schedules. To adjust these schedules, see page 2 the program section.
In addition to Automatic mode, this thermostat has 3 extra manual modes, i.e , each of these manual modes maintains a constant set temperature set by the user.
- Comfort temperature mode, the highest temperature you want to achieve, this is the temperature that will be required when the room is in use. Default is 22 °C.
- Economy temperature mode, the lowest temperature, the temperature you want to go no lower than when the room is not in use. Default is 16 °C.
- Vacation temperature mode, this is set to stop your floor from going below the set temperature. Default is 10 °C.
To change the set temperatures, touch temperature display. Use or to adjust to the required temperature. Touch to store and exit.
2) Touch day display .
Use or to change the time. Press and hold
Use or to change the day. Touch to store and exit.(or touch Day display to cancel and exit).
or to change the time faster. Touch to store and exit( or touch time display to cancel and exit).
Done
Done
Done
The buttons are locked
Turning on/off the thermostat
Heating is turned on
Automatic mode,
executes the programmed schedules
The sensor is not being read by the thermostat
Err
Temporary temperature override
Frost protection activated
Room temperature
RT
AUTO
Floor temperature
FT
O / RIDE
Symbols
The program number
Day of the week. Day 1= Monday, Day 2= Tuesday... etc.
Reminding the user to connect the floor sensor (AF and F model only)
Touch to view floor temperature for 5 seconds (AF model only)
Touch to switch among Auto
Touch to start programming of your thermostat
Comfort temperature mode
Economy temperature mode
Day
Program 1,2,3,4
Vacation temperature mode
Symbols Description
Description
Set
Schedule
Heating
Mode
LCD SYMBOLS
CONFIGURATION MENU
SELECT THE REQUIRED OPERATING MODE
TS8100-TH-H THERMOSTAT INSTRUCTIONS
See overleaf for further instructions >>>
SETTING THE CLOCK AND DAY OF THE WEEK
Radiant Australia Pty Ltd
Unit 1 / 18 Profit Pass, Wangara, WA 6065
Telephone:
08 9302 4140
Fax:
08 8490 2343
Email:
