21
R1C 34 /B - RAD - ING - Manuale - 2007.1_SK.3_MIAB3013_R7_B3
1 C
o
ll
e
gamento s
o
n
d
a s
a
nit
a
r
io
_
.B
_
E
N
1. INSTALLATION
INST
ALLER
1.1.16. DHW SENSOR INSTALLATION
To install the DHW sensor inside the remote water
tank, please proceed as follows:
Remove the boiler front case panel (see Paragraph
ACCESSING THE BOILER);
Grasp the left and right control panel support
brackets (see fig. 1) and pull them outwards, at
the same time rotating the panel downwards;
Take the 8 m. length DHW sensor cable (see
C-fig.1), located onto the boiler bottom plate, and
insert the sensor inside the water tank sensor
holder.
Once this operation has been completed, rotate
the control panel upwards and install the front
case panel back to its original position.
C
fig. 1