Radiant, Inc.
3
Operating Configurations
The DVMD1-X
is a standalone product with its own Digital Signal Processor (DSP). It requires
only power and video input and produces video output with overlay and a dry contact relay alarm.
The user customizes the performance to accommodate site-specific operational requirements.
A security system with multiple video cameras may use a single DVMD1-X
that is connected to
other DVDM1s through the CHAIN cable. Each subsequent DVMD1 must be assigned a unique
address on the rotary switch. The address of the DVMD1-X is always set to “FF0”. Setting up
the addresses is covered in a later section of this manual.
Figure 2A illustrates the DVMD1-X
in the single-unit configuration. All of the signal processing and
user settings are saved in the configuration portion of the onboard flash memory. This allows the
DVMD-X to be configured for stand-alone applications.
DVMD
VIDEO
MONITOR
VIDEO
CAMERA
12 VDC
POWER
SUPPLY
USER ALARM
PANEL
Figure 2A – DVMD1-X
Single Unit Configuration
