Owner’s Manual – Gas Storage
5
H3958 026271 Rev. A
Refer to the Data Label for correct gas
type. Gas piping should be connected
through the side of the case (see figure
below).
The plastic grommet must be installed
around the pipe and clipped into the
case.
The gas control is fitted with a
RC½"/15mm socket. A union
connection should be used.
Gas pipe sizes should be in accordance
with AS5601/AG601.
WARNING
Under no circumstances must the
flue terminal cover be removed /
or dis-assembled from the water
heater, except by a fully qualified
and authorised person.
Damage to the water heater will
occur and warranty will be void.
Gas
Entry
Gas Connections
