Radiant Communications VABX700816S User Manual Download Page 12

Warranty

Radiant Communications Corporation warrants that at the time of shipment

the products manufactured by Radiant Communications Corporation will be

free from defects in material and workmanship and will conform to the

specifications furnished by or approved by Radiant Communications Corpo-

ration.

Should any defects appear within one year from date of shipment, Radiant

Communications Corporation shall, at its sole discretion repair or re-

place the defective material.  Such material shall not be accepted for

return or repair without prior notification of Radiant Communications

Corporation.

Return shipments to Radiant Communications Corporation shall be at the

buyer’s expense.  Radiant Communications Corporation will return said

equipment prepaid via the best way.

The foregoing warranty is in lieu of and excludes any and all other ex-

pressed or implied warranties of merchantability or fitness, or other-

wise.  Items manufactured by any supplier other than Radiant Communica-

tions Corporation assumes no responsibility for the performance or reli-

ability of the product.

Radiant Communications Corporation will not be liable for any special or

consequential damages, or for loss, damages, or expense directly or in-

directly arising from the use of the products or any inability to use

them either separately or in combination with any other equipment or

material or from any other cause.

This warranty does not extend to any product manufactured by Radiant

Communications Corporation that has been subject to misuse, neglect,

accident, improper installation, act of God, or an violation of the in-

structions furnished by Radiant Communications.

Summary of Contents for VABX700816S













Reviews: