10
If you get noise --check:
Broken leads are a very common cause of interference.
·
Open XLR and jack plugs, and check that all wires are firmly connected
in place.
·
Wiggle and stretch the cable while feeding a signal through it, to check
for breaks within the cable.
·
Plug and unplug connectors several times to see if you have a dirty
contact (it’s a good idea to do this to every connector in your system
once a year)
·
Check units for saturation
Make sure that you are not exceeding maximum optical dynamic range
for these units.
If this doesn’t produce an improvement, call RCC Tech Support 1-908-757-
7444 ...
