Please reference FAQs in the Radian app to learn more about device capabilities when
using the Radian M2 internal battery vs. boat battery and any additional questions.
The Radian M2 Device has an LED array located
along the side of the device.
To connect to 12v power supply, use one of
the two accessory wiring harnesses.
4.
5.
7.
6.
The LEDs will flash once
the yellow tab is removed
and stay lit when the
device is connected to any
12-volt power supply.
The LEDs will light up then turn off once the device
is connected. It is important to leave the device
connected to the 12V boat battery when available
because the device sends more information to the app
when supplied with the boat battery instead of using
internal battery power.
Follow steps in mobile
app to complete
device activation.
Connect wire to device. Coil wire and zip tie to
protect wires, helping prevent damage.
Version 1.2 03/2022
MOUNTING INSTRUCTIONS
Clean the mounting area and ensure the
surrounding area is dust-free and dry.
90º
1.
2.
3.
Assure proper orientation to the sky by
confirming that the device side with the Radian
sticker is facing up or at a 90-degree angle.
Peel away protective film and affix the device in
the hidden location (again, ensuring the proper
orientation and not directly under any metal.)
OR
IMPORTANT: Ensure screw
is securely fastened to
connect device and hold
wire in place.
