Bantam Plus Getting Started Guide v6
23
Radian Research, Inc.
3 Product Features
This chapter provides detailed information on the product features of the RB-2X
Bantam Plus Portable Test System and contains the following sections:
3.1 RB-2X Components and Controls
3.2 RB-2X Automated Software Controls
3.1 RB-2X Components and Controls
3.1.1 Top Panel
The components of the RB-2X Bantam Plus Portable Test System top panel are
explained below.
1.
Line Voltage ON/OFF 5 Ampere Breaker Switch:
Used to power and protect
the Bantam Plus.
The input voltage operating range is 90V to
300V. The design will source 69V to 480V to the
meter socket. Breaker switch is rated at 5 Amps.
The Bantam Plus software operating system must
be shut down before powering off the unit.
2.
Front Panel Power indicator:
Indicator light that glows blue when the RB-2X
Bantam Plus power is on.
Always check the service voltage before
connecting the test cable. Connecting the
equipment to an improper voltage will trip the
breaker and can result in equipment damage.
3.
Front Panel Voltage & Current Indicator:
Red and Yellow LEDs will activate
when Voltage and/or Current is applied to the integrated meter socket.
C
AUTION
!
C
AUTION
!
N
OTE
Summary of Contents for Bantam Plus RB-2 Series
Page 1: ......
