Switchbone V2
Radial Engineering Ltd.
2
FEATURES
9
1
2
3
4
5
6
7
8
10
11
12
13
1. 15VDC:
Connection for the power supply.
2. SLINGSHOT:
Contact closure output used to activate external
devices.
3. TUNER/OUT-C:
Isolated ¼” output used to feed a tuner or a 3rd
guitar ampli
fi
er.
4. 180º:
Polarity reverse switch, used to phase-align OUT-B and C.
5. OUT-B:
Isolated ¼” output used to feed the signal to your second
guitar ampli
fi
er.
6. LIFT:
Ground lift switch used to eliminate hum and buzz.
7. OUT-A:
Direct ¼” output used to feed your primary ampli
fi
er.
8. INPUT:
Standard ¼” input used to connect your guitar to the
Switchbone V2.
9.
BOTH / OUT-C:
Recessed switch sets the footswitch function to
either activate both A and B amps, or turn on amp C.
10. BOTH:
Footswitch used to activate both A and B amps, or turn on
amp C.
11. TOGGLE:
Footswitch used to select between amps A or B.
12. BOOST:
Footswitch used to activate the power booster.
13. TOGGLE / BOOST:
Recessed switch to select which footswitch is
used to activate external devices via the SLINGSHOT.
Switchbone V2
Radial Engineering Ltd.
Switchbone ABY Block Diagram
15