background image

Bassbone V2 Preamp

Radial Engineering Ltd.

7

USING A SECOND BASS

Many players employ two basses when they perform. These typically 
include a traditional passive bass such as a Fender P-Bass® and a new 
generation 5 or 6 string with active pickups. These basses produce very 
different output levels and tonal ranges. This poses a problem when 
switching from one instrument to the other, as the amplifi er settings must 
be dramatically adjusted to suit each instrument. 

The Tonebone Bassbone V2 solves this problem because each channel 
features separate level and equalization controls. You can preset 
channel-1 for your active bass and use channel-2, with it's enhanced 
EQ, to shape the sound of your passive bass. 

Connecting a second bass to the channel-2 input jack automatically 
changes the Bassbone V2 into a two instrument preamp. With two 
basses, use the SELECT footswitch to transition between instruments. 

INPUT-A

INPUT-B

A/B

SELECT

Adjust the 3-band EQ settings to suit your second bass and use the 
LEVEL-2 control to match the volumes.

CONNECTING PIEZO PICKUPS

The trouble with most piezo pickup systems is that they are not very 
faithful to the original tone when you plug them directly into a regular 
instrument amplifi er or direct box. The sound is often thin and peaky. To  
accommodate acoustic upright players that use piezo pickups we added 
the Radial PZB™ piezo booster to channel-2. The PZB booster allows you 
to connect a piezo transducer directly to the Bassbone.

The recessed PZB switch is located next to the channel-2 input jack and 
is used to turn the piezo booster on/off. Use a small screwdriver to access 
the switch. When the PZB switch is 
set to the outward position the piezo 
booster is off and channel-2 accepts 
standard electric bass signals from 
active or passive magnetic pickups. 
Pushing the PZB switch inward turns 
the piezo booster on increasing the 
input impedance to 10 meg-ohms 
and boosting the gain by 10dB. The 
higher impedance widens the piezo's 
frequency response to bring out your 
instruments natural tone. 

Summary of Contents for Tonebone Bassbone V2

















Reviews: