Version 1.0 - August 2022
16
User manual SDM Battery Series
✔
✘
✘
✘
✔
✘
!
!
Figure 8.4A
Figure 8.4B
Figure 8.4C
8.3. Reaction arm foot
Ensure the foot of the reaction arm aligns with the length of the nut as seen in Figure 8.3A. The length of the foot
cannot be shorter or longer than the nut as seen in Figure 8.3B and Figure 8.3C.
Figure 8.3A
Figure 8.3B
Figure 8.3C
NOTE:
Improper reaction will void warranty and can cause premature tool failure.
WARNING:
Always keep your hand and body parts clear of the reaction arm and barrel when the tool
is in operation, see Figure 8.4C.
8.4. Reaction point
Ensure the reaction arm reacts off the middle of the foot as seen in Figure 8.4A. Do not react off the heel of the
reaction foot as seen in Figure 8.4B.
Please contact Radial Torque Tools B.V. or your local distributor for custom reaction arms.
9. Parts and maintenance
Tool service is recommended every year or 250.000 cycles, whichever comes fi rst. Tool repair and
maintenance should only be carried out by authorized, trained personnel. When service or repair is
required, contact Radial Torque Tools B.V..
•
Have your power tool serviced by qualifi ed repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
• When servicing a tool, use only genuine Ingersoll Rand replacement parts and follow all
maintenance instructions.
Use of unauthorized parts or failure to follow Maintenance Instructions
may create a risk of electric shock or injury.
•
Do not dispose of batteries in fi re, incinerate or heat above 100° C (212° F).
Batteries present a
risk of fi re or chemical burn if mistreated.
• Responsibly recycle or dispose of batteries in accordance with all applicable standards and
regulations (local, state, country, federal, etc.).
Improper disposal may endanger the environment.
10. Service
