Radial Engineering Ltd.
Reamp Station™
True to the Music
®
10
The 3.5mm input (continued)
The 3.5mm input is on the front panel of the Reamp Station so you
can connect quickly when inspiration strikes, instead of having to dig
around behind your equipment rack should you have the Reamp Station
rackmounted. However, keep in mind that you should only send signal to
one of the Reamper inputs at any given time.
Reamping using a mobile device as the sound source
Linking multiple Reampers
The LINK IN and LINK OUT connections on the Reamp Station allow
you to hook up multiple Reampers using a single output from your audio
interface.
Linking multiple Reampers
Use a balanced 1/4" TRS
cable to connect from the
LINK OUT on the first Reamp
Station to the LINK IN or the
REAMP IN on the second
Reamper.
Repeat this step to link
together additional Reamp
Stations as needed.
The LINK OUT carries a copy of the same balanced signal that you
feed to the input of the Reamper, and it won’t be affected by any of the
controls on the Reamp Station. If your audio interface is short on line-
level outputs, you can use this feature to feed a compressor on another
outboard effects processor at the same time that you are Reamping with
the Reamp Station.
