True to the Music
®
Radial Engineering Ltd.
Reamp HP™
GETTING STARTED
The Reamp HP is completely passive, meaning it doesn’t require any
power to operate. As soon as you’ve made your connections it will be
ready for use.
The output of the Reamp HP uses a standard ¼” TS instrument cable
to connect a mono signal to your guitar effects pedals and amplifier.
We recommend keeping your cable lengths under 15ft to minimize the
possibility of noise and interference on your audio signal.
The inputs of the Reamp HP use ¼” TRS or 3.5mm (1/8”) TRS cables.
These cables have an extra conductor that allows them to transmit both
the left and right channels from a headphone output jack to the Reamp
HP.
4
¼
” TS
Connects to the
Reamp HP output
¼
” TRS
3.5mm TRS
Connects to the
Reamp HP inputs
Connecting to the Reamp HP Inputs
The Reamp HP is designed to connect directly to the headphone output
jack on your audio interface. This allows you to get started as quickly
and easily as possible, without having to unplug any cables at the back
of your interface.
Use a TRS cable as shown above to connect the 1/4” INPUT or the
3.5mm MINI IN from the Reamp HP to your source device. You can use
either of these inputs and get the exact same results, as both of these
connector types are provided in order to make it easy to connect to the
Reamp HP without the need for adaptor cables. Keep in mind that you
should only send signal to one of the Reamp HP inputs at any given time.
In general, you’ll find that most audio interfaces will have ¼” headphone
outputs, while laptops and other playback devices like smartphones and
tablets will be equipped with 3.5mm headphone jacks.
Tip
Ring
Sleeve
Tip
Sleeve
