True to the Music
®
Radial Engineering Ltd.
EXTC Stereo™
5
Connecting to your guitar effects pedals
To interface your pedals with the EXTC Stereo, use standard 1/4” TS
unbalanced guitar cables and connect them to the front panel effects
insert jacks. The left and right SEND jacks connect to the inputs of the
first pedal in your signal chain, while the outputs of the last pedal are
returned to the EXTC Stereo by connecting to the left and right RECV
jacks.
When using the EXTC Stereo for the very first time, start by connecting
just a single pedal to these effects insert jacks, which will make it easier
to troubleshoot before you add additional pedals.
GETTING STARTED
Once you’ve made all your connections to the EXTC Stereo, you are
ready for the fun part: playing back audio tracks through your pedals.
Begin by setting up the controls as follows: set the SEND and RECEIVE
controls to 12 o’clock, turn the BLEND control fully clockwise to the ‘wet’
position, and engage the EFX LOOP on/off switch so the green LED
illuminates.
Recommended initial settings on the EXTC Stereo
Connecting guitar pedals to the EXTC Stereo
