True to the Music
®
Radial Engineering Ltd.
EXTC 500 Module
FEATURE SET
1. BLEND - Lets you adjust the wet-dry mix
between the original unprocessed signal
and the EXTC’s effects loop.
2. 180º POLARITY REVERSE - Lets you
adjust the polarity of the wet signal path
and bring it into phase with the dry signal
when they are being mixed together.
3. OMNI INSERT (with Workhorse) - Turns on
the Workhorse TRS Omniport insert jack.
This is used to add a second unbalanced
effects insert path, wired in series after the
front-panel loop.
4. SEND LEVEL - Used to adjust the output
level going to the pedals and optimize
signal-to-noise for best performance.
5. RECEIVE LEVEL - Used to set the effects
loop return path level and further optimize
signal-to-noise.
6. ¼" SEND and RECV - Separate send and
receive jacks used to connect guitar pedals
to the EXTC. Front panel mounted to make
connections easy for use on the desktop
and transformer isolated to eliminate hum
and buzz caused by ground loops.
7. OMNIPORT (with Workhorse) - TRS insert
jack lets you connect effects to a second
unbalanced effects insert path, wired in
series after the front-panel insert loop.
1
4
3
2
6
7
Rear Panel
5
1
