Radial Engineering PZ-DI, User Manual

Page: 6 / 12

Radial Engineering Ltd. PZ-DI™ User Guide
PowerIng uP
Always make sure levels are turned off before making con-
nections. This will help eliminate turn-on transients that can
harm more sensitive components such as tweeters. You
should also test at low volumes before turning up.
The PZ-DI does not require a battery or power supply to
make it work. It uses 48V phantom from the mixing console.
All you do is plug it in, turn the phantom power on at the
mixing desk and the power LED on the PZ-DI will illuminate
to let you know you are set to go.
4
The +48V LED will illuminate when
phantom power is present.
THRU
INPUT
PAD
1M
10M
220K
-15dB
OFF MAX
LOAD FILTER
LOAD: 1MEG CLASSIC· · 10M PIEZO 220K MAGNETIC
3kHz
HI CUT
SELECT
LO CUT
ouT ouT
LOAD: Set the load switch to match the type of pickup or instru -
ment you are using.
PAD: Set to the outward position to start. Depress to engage
the PAD if you detect clipping. High output sources like
digital keyboards and active basses are more likely to
cause clipping.
LO CUT: Start with the control turned fully counter-clockwise to
the OFF (bypass) position.
HI CUT: Set to the outward position to bypass the high frequency
filter.