manualshive.com logo in svg

Radial Engineering HEADLIGHT, Manual

Share
Download
Radial Engineering HEADLIGHT Manual Download Page 14

Radial Engineering Ltd.

Headlight™ User Guide

12

SPEcIFIcATIONS*

Audio circuit type: ..........................................................................................Classic Class-A FET
Frequency response: .............................................................................................. 30Hz to 30kHz
Total Harmonic Distortion (THD+N): .....................................................................................0.01%
Dynamic range: ..................................................................................................................116dBu
Maximum input: ................................................................................................................... +8dBu
Input impedance: ........................................................................................................... 20K to 1M
Gain - CH1 to CH4: ............................................................................................................. -0.5dB
Clip level - output: ................................................................................................................ +7dBu

Noise floor:

 ....................................................................................................................... -112dBu

Intermodulation distortion: ....................................................................................................0.02%
Phase deviation: .........................................................................................-1.35º @ -20dBu/1kHz
Crosstalk:............................................................................................................................<-92dB
Power: .................................................................... 9V / 80mA Center pin negative (not included)
Construction: ........................................................................ 14 gauge steel chassis & outer shell
Size (LxWxD): ............................................................................5” x 4.9” x 2” (127 x 124 x 51mm)
Weight: ...............................................................................................................2 lbs (907 grams)
Warranty: ..............................................................................................Radial 3-year, transferable

* Subject to change without notice.

Summary of Contents for HEADLIGHT

















Reviews:

No comments

Brands by name

Popular brands

Load more brands