Radeon 9200 Pro, User Manual

Page: 15 / 89

GRAPHIC CARD USER MANUAL
2-2
Note:
If the computer has a graphics chip soldered down on the
motherboard, refer to the manual for the system or motherboard for
information on how to disable it.
3. Insert the Graphics Accelerator card.
Locate the empty AGP socket on the
motherboard and use the following
instructions to insert the Graphics
Accelerator reference card into that
socket:
Grasp the Graphics Accelerator
reference card by its edges.
Align it with the empty AGP socket on
the motherboard, and gently insert it into place.
Make sure that the card is pressed evenly and completely into the socket.
Fasten the card with the bracket screw.
Note:
Use the figure above to help locate the Accelerated Graphics Port
(AGP) socket on your motherboard. The exact configuration of the
components on your motherboard may differ from the figure. Look
for a single, smaller socket between the set of PCI sockets and the
processor.
4. Reconnect all cable and Replace the cover.
Plug the cable from your computer
monitor into the back of the
Graphics Accelerator reference
card. Make sure it is securely
fastened. Carefully replace the
computer cover and plug the
power cord back in.