92
EN
26.7 Menu 9.7 - Setting the Venetian blind mode
This function enables you to use the Troll Comfort DuoFern to control
Venetian blinds.
The following configurations are possible:
◆
Jog mode
◆
Automatic slat adjustment
◆
Tilting time
Additional Venetian blind functions can be configured, for exam-
ple, with a HomePilot®:
◆
Standard slat position
◆
Automatic tilt to “Down” direction
after manual stop
◆
Automatic tilt to sunshine position
◆
Automatic tilt to ventilation position
◆
Automatic tilt after moving to a target position
◆
Slat runtime and motor dead time
Brief description of jog mode
Tapping the operating buttons briefly enables Venetian blind slats to be
conveniently configured.
In order to conveniently move the Venetian blinds to the end points, ac-
tuate the control button for 1 second longer than the configured tilting
time. Once the button is released, the Venetian blinds will move to the
end point without stopping.
Brief description of the automatic slat adjustment function
If the Troll Comfort DuoFern controls the motor in the
down direction
until the total running time has elapsed or the Venetian blind motor
is stopped manually, then the motor reverses automatically for a brief
period (automatic slat adjustment function). This serves to position the
slats to the desired angle in order to provide sun shading to the room.
T
