109
EN
28. Menu 9.9 - DuoFern settings
Menu 9.9 - DuoFern settings
Symbol Menu
Page
9.9.1
Logging on and off........................................... 110
9.9.2
Setting the DuoFern mode ............................... 114
9.9.3
Setting the solar mode .................................... 116
9.9.4
Switching weather data on/off ......................... 119
9.9.5
Transmitting manual control commands ........... 121
9.9.6
Transferring automatic states ........................... 122
IST
9.9.7
Displaying the DuoFern address (radio code) .... 123
In order for your Troll Comfort DuoFern to be able to receive control signals
from the DuoFern network or send control commands to the DuoFern
network, it is necessary to log each desired DuoFern device (e.g. DuoFern
actuator etc) onto the Troll Comfort DuoFern.
To do so, please also read the operating manual of the
respective DuoFern device.
Maximum number of logged-on devices
You can assign a maximum of 20 DuoFern devices to a single Troll
Comfort DuoFern.
Additional information about logging on can be obtained from the
“log-on matrix” on our website at:
www.rademacher.de
