manualshive.com logo in svg

RADEMACHER Troll Basic 5602, Instruction Manual

Share
Download
RADEMACHER Troll Basic 5602 Instruction Manual Download Page 48

48

EN

18.  Dimming the LEDs

i

The Troll Basic 5602 is equipped with automatic dimming LEDs 
to reduce the light intensity (e.g. bedrooms). The LEDs dim as the 
roller shutters are lowered. To use this function, the overall running 
time of the roller shutter must be set.

Maximum LED brightness

As soon as you press any random button, the maximum bright-
ness of the LEDs will be switched on for at least 10 seconds.

Set the overall running time of the roller shutter

1. 

 

First fully close the roller shutters.

2. 

 + 

  

Then, first press and hold the SET button  

   

and then also the UP (

s

s

) button  

  

together. 

3. 

  

>

  

 

After approx. 4 seconds the timer LED  

   

will flash to confirm, and the roller  

   

shutters move to the upper end point. 

4. 

Release both buttons immediately as soon as the roller shutter 
reaches the upper end point and stops. 
The overall running time is now stored.

i

  If the overall running time is not set,  

the automatic dimming will be incorrect.

Summary of Contents for Troll Basic 5602























































Reviews:

No comments

Brands by name

Popular brands

Load more brands