RADEMACHER RolloTron Comfort 1623 45 19 Operating And Assembly Manual Download Page 19

Page: 19 / 88

11. Safety instructions for electrical connection

Danger due to electric shock when working on all

electrical systems.

◆

The electrical connection and all work on electrical

systems must only be carried out by a qualified elec-

trician in accordance with the connection instruc-

tions in these operating instructions.

◆

Carry out all installation and connection work only in

an isolated, zero-volts state.

◆

Disconnect all phases of the mains power supply cable

and secure it to prevent any reconnection.

◆

Check the system for a zero-voltage status.

◆

Check that the voltage / frequency on the type plate

corresponds to local mains conditions prior to instal-

lation.

NOTE
The electrical connection for the RolloTron Comfort

DuoFern can be made either with the supplied con-

necting cable or via a fixed laid cable.

Summary of Contents for RolloTron Comfort 1623 45 19

























































































Search results

Summary of Contents for RolloTron Comfort 1623 45 19

Reviews:

Related manuals for RolloTron Comfort 1623 45 19

Brands by name

Popular brands

RADEMACHER RolloTron Comfort 1623 45 19, Operating And Assembly Manual

Search results

Summary of Contents for RolloTron Comfort 1623 45 19

Reviews:

Related manuals for RolloTron Comfort 1623 45 19

Brands by name

Popular brands