44
EN
19.3 Menu 9.6 - Configuring the blockage detection
The Troll Standard is able to monitor the torque of motors equipped
with a mechanical end point setting. This enables the controller to
switch off the motor in the event of overloading or blockage. As a
result, the roller shutter is protected from damage.
i
Blockage detection
can only be used in combination
with a tubular motor
with mechanical end point setting
.
1.
Open menu
9.6
.
2.
Activate/deactivate the blockage detection
and confirm.
On = blockage detection on *
Off = blockage detection off **
* Continue with point 3.
** After deactivation and confirmation the
display jumps back to the menu..
3.
Select and confirm the suitable
motor type.
A list of the motor types is provided
on the following page.
Please also read the instruction manual for the
tubular motor being used.
Summary of Contents for RolloHomeControl Troll Standard 3650 03 22
Page 58: ...58 EN ...
Page 59: ...59 EN ...
