11
i
EN
9. Brief description
The
Troll Standard
controller is designed for controlling roller
shutters, Venetian blinds, slats or awnings by connecting a
corresponding tubular motor.
Roller shutter control
The system enables roller shutters to be automated.
Manual operation
It is possible to manually control the connected tubular motor at
any time by using the controls.
External controller via the two inputs E1 and E2.
The Troll Standard features two inputs
E1
and
E2
(230 V / 50 Hz)
for connecting an external sensor or external controller (e.g. Troll
Comfort), see page 17.
Brief description of blockage detection function
The Troll Standard is able to monitor the
torque
of motors
equipped with
mechanical end point setting
. This enables
the controller to switch off the motor in the event of overloading
or blockage, see page 34.
Installation (see page 18)
The Troll Standard can be integrated into most commercially
available switch ranges with the help of a corresponding
intermediate frame 50 x 50 (DIN 49075). Suitable switch ranges
are detailed on the following page.