background image

19

EN

18.  Warranty Conditions

i

RADEMACHER Geräte-Elektronik GmbH provides a 24-month 
warranty for new systems that have been installed in compliance 
with the installation instructions. All construction faults, material 
defects and manufacturing defects are covered by the warranty.
Your statutory warranty claims shall remain unaffected by this 
warranty.

The following are not covered by the warranty:

 

Incorrect fitting or installation

 

Non-observance of the installation and operating instructions

 

Improper operation or wear and tear

 

External influences, such as impacts, knocks or weathering

 

Repairs and modifications by third parties, unauthorised 
persons

 

Use of unsuitable accessories

 

Damage caused by unacceptable excess voltages  
(e.g. lightning)

 

Operational malfunctions caused by radio frequency  
overlapping and other such radio interference

For the warranty to be applicable, the new device must have 
been purchased through one of our approved specialist retailers.  
Proof of this can be provided by presenting a copy of the bill.
RADEMACHER will remedy any defects that occur within the  
warranty period free of charge either by repair or by replacement 
of the affected parts or by supplying a new replacement unit or 
one to the same value. There is no general extension of the original 
warranty period by delivery of a replacement or by repair as per 
the terms of the warranty.

Summary of Contents for HomePilot 9486





















Reviews: