manualshive.com logo in svg

RADEMACHER 9499, Instruction Manual, Page: 2 / 40

Share
Download
RADEMACHER 9499 Instruction Manual Download Page 2

2

EN

i

Contents

1.    This manual... ...........................................................................4

1.1    How to use this manual ....................................................................4

2.    Hazard symbols .......................................................................4

2.1    Symbols and depictions used.........................................................5

3.    Safety instructions ..................................................................6

3.1    Intended use .........................................................................................7

4.    Included in delivery ................................................................8
5.    General view ............................................................................9

5.1    Operating buttons ........................................................................... 10
5.2    Display and its symbols.................................................................. 11

6.    Product description ............................................................. 12
7.    Technical specifications ...................................................... 13
8.   Installation............................................................................. 14

8.1    Installation sequence ...................................................................... 15

9.    Menu overview ..................................................................... 16
10.    Menu 1 - Configuring the sun function ............................ 17
11.    Menu 2 - Configuring the wind function ......................... 19
12.    Menu 8 - Service functions ................................................. 22

12.1    Menu 8.1 - Sun test function ........................................................ 23
12.2    Menu 8.1 - Wind test function ..................................................... 25
12.3    Menu 8.2 - Rotation direction test / change of  
 

rotation direction ............................................................................. 26

12.4    Menu 8.3 - Checking the battery status ................................... 27
12.5    Menu 8.0 - Viewing the software version ................................ 28

13.    Menu 9 - Logging DuoFern devices on/off ...................... 29

13.1    Logging on devices ......................................................................... 30
13.2    Logging off devices ......................................................................... 32
13.3  Clear-up ............................................................................................... 34
13.4    Deleting all DuoFern devices ....................................................... 35

Summary of Contents for 9499









































Reviews:

No comments