64
Setting the upper end point
Simultaneously press and hold both buttons. The roller shutter travels in the desired direction and the indicator light flashes green. When a button
is released, the shutter stops and the position reached is stored as an end point. The indicator light continuously lights up for approx. 5 seconds to
confirm this.
Setting the lower end point
ATTENTION!
Setting the wrong upper end point may lead to overload or
damage the RolloTron DECT or the drive.
●
Do not set the upper end point right up to the limit stop.
●
Release the button promptly and never allow it to extend
beyond the respective end point.
i
The belt must not be too loose when it reaches the
lower end point. Tighten the belt slightly until it is
tensioned by the weight of the roller shutter.
