radefy AVATON Quick Start Manual Download

Page: 2 / 4

To connect the AVATON IoT Smart Device to the Local WiFi Network, we perform

the following steps:

We connect the AVATON to the power plug,

In 1-2 sec the Green Light will turn ON indicating that the power supply is
connected and the AVATON IoT has power

A few seconds later the

Red Light

will start flashing, indicating that the AVATON

IoT is not connected to the WiFi

Press button S4 for 1-2 sec as indicated in the video and the picture below:

A few seconds after you release the S4 button, the Red light will start blinking
faster

Summary of Contents for AVATON

Page 1: ...Digital lock Connecting AVATON IoT Smart Device to Local WiFi Network ...

Page 2: ...ill turn ON indicating that the power supply is connected and the AVATON IoT has power 3 A few seconds later the Red Light will start flashing indicating that the AVATON IoT is not connected to the WiFi 4 Press button S4 for 1 2 sec as indicated in the video and the picture below 5 A few seconds after you release the S4 button the Red light will start blinking faster ...

Page 3: ...ppear 7 Select RADEFY SD xxxxxxx from your mobile WiFi connection list 8 When prompted enter the RADEFY SD xxxxxxxxxx password 12345678 9 From the Current Network select the RADEFY SD 348b6ae1 to open the Browser 10 When in the Browser press on the Burger on the top right side of the screen 11 Select Config New AP ...

Page 4: ...ssword 14 Press Apply 15 If password is correct the Browser will automatically close from your phone and the Red Light will stop blinking and remain ON 16 If password is not correct it will take you to the Local WiFi network selection page to start network selection from the beginning ...