BASE STATION SET UP
Remove the protective film that is applied to the LCD screen before using
the product.
Plugged in with power adapter and the base station will start to work.
Battery power is optional but it helps keep the settings when plugged out.
Since previous settings will be reset when plugged out, we recommend
installing the batteries for the base station.
Base station can stand upright on the table or mount on the wall.
1.
2.
Open the battery compartment cover at the back of the base station,
insert 3 x AA batteries or plug in the power adapter to power up the base
station.
After power-on, all icons on the LCD will light up in 3 seconds, and you
will hear a beep tone. At the mean time it will start to detect the indoor
temperature and humidity.
Then it will start to detect the air pressure for 10 seconds, and the
pressure reading will keep flashing during this process.
Next, it will start to make connections to the remote sensors. Now open
the remote sensor battery compartment, set channels of the 3 remote
1.
2.
3.
4.
3.
WF-60C WEATHER STATION
INITIALIZATION
03