Radcal Accu-Dose, User Manual

Page: 7 / 42

INTRODUCTION
The Accu-Dose
™
system measures dose, time, and more.
Measurements are processed and displayed by a
microprocessor-based control unit. To eliminate cable noise,
dose sensors connect to the control unit via a 4-m cable that
carries only digital signals and operating voltages.
Dose is measured using ion chamber or diode-dose sensors
connected directly to a digitizer-electrometer.
The table on page 6 lists available dose sensors.
The Accu-Dose Basic system measures dose and dose rate.
The Accu-Dose Advanced measures dose, dose rate and more
for radiography, fluoroscopy and leakage measurements. A USB
interface on the Accu-Dose Advanced allows a PC to control and
1