10 of 18
TC-600 Radar Speed Sign Installation Manual MN0017 v21.02
Installing and Positioning the Radar Speed Sign (cont’d)
•
When you are ready to hang the sign onto the pole place the
¼” x 4” bolt (supplied) into the top hole of the housing bracket
(a long screwdriver will also work).
•
Lift the sign and place the bolt into the U-slot on the pole bracket.
This will hold the sign so that the side bolts (supplied) can be in-
stalled.
•
Install the (4) 1/4" bolts x 5/8" length hex head bolt, lock
washers, and flat washers (supplied), 2 on each side of bracket.
•
Once the sign is securely installed, the 4” bolt from the top hole can be removed.
___________________________________________________________________________________________
Optional Sign Mounting Lock
An
optional
sign mounting lock is available to use with the Universal Mount Bracket to secure the radar speed sign
to the pole.
•
Unlock the lock on the larger black end of the lock set and remove lock.
•
Slide the lock set bar through the hole at the bottom of the sign mounting bracket.
•
Attach lock to the end of the lock set bar and lock.
Step 4: Solar Models - Mounting the Solar Panel to the Pole
For solar panel installation instructions, please refer to Appendix A.
Bolt in top hole
of housing bracket
U-slots on pole
bracket