Tel: +386 3 4900 800
http://radar-electronics.com/
3702003B
Copyright 2016
Page 18
1.
Clean the sensor face of any accumulation of dirt, mud, snow, ice, or debris.
2.
Visually inspect the attached wiring and cable and verify that they are properly
secured, not chafing or dangling free where they could become snagged and
damaged. Inspect the Radar Sensor and Operator Display Module and verify
that they are securely attached to the vehicle.
3.
Set the park brakes, start the vehicle, depress and hold the vehicle brake.
4.
Verify the green “POWER” light is illuminated on the in-cab display.
5.
The area to the side of the vehicle should be clear of obstacles for a distance of
6 meters (20ft). If the display shows any indicator other than the green light
then there are objects to the side of the vehicle that will interfere with the test.
Move the vehicle to a clear area and proceed.
6.
The assistant should move to approximately 2 meters (6ft) to the rear of the
sensor in sight of the operator's mirrors. He should then walk toward the
centerline of the sensor parallel to the vehicle, while the operator notes when
the display detection LED illuminates, signifying the sensor has detected the
object.
7.
The assistant should continue walking through the area at the side of the
vehicle while the operator notes the area that detection occurs.
8.
Now face the sensor and walk from the center of the sensor straight back,
away from the vehicle. When the display detection LED quits illuminating the
detection limit has been reached.
9.
Move halfway back towards the sensor and remain still for a few seconds, the
display detection LED should stay lit, demonstrating the system’s ability to
detect a still object.
10.
The assistant should walk the complete side of the vehicle noting the detection
edges of the entire coverage area.
11.
After the test the assistant needs to communicate to the operator the details
on the detection zone.
For questions, call +1.844.787.2327 toll free in the USA. Call +1.208.323.1000 or
send a fax request to +1.208.323.1034 for outside the USA, or submit an online
request at
. A safety specialist will respond within 24
hours.
Summary of Contents for PreView Side Defender SDR8503
Page 24: ......