Tel: +386 3 4900 800
http://radar-electronics.com/
3700046C
Copyright 2016
Page 2
Display Unit Function
Range Indications
5 Zones
Display Buzzer
Status LED
Volume Control/
Ack Switch*
Item
Description
Status LED
Illuminates green continuously after power is applied to the system. The
status will change from green to red if a system malfunction occurs.
Range
Indications
Illuminates to give operator a relative distance measurement to the closest
detected object. LED’s operate from the left to right, with a closer object
resulting in more LED’s illuminated.
Display Buzzer
Sounds audible tones to alert operator of obstacles. The speaker pulse
rate will increase as the vehicle gets closer to an object.
Volume
Control/Ack
Switch*
This momentary push button switch allows three different buzzer volume
levels to be selected. It can also be configured as an acknowledge switch
to silence the buzzer using the Service Tool.
Table 1. Operator Display Description
*CD6102 OC display does not contain a Volume Control / Ack Switch
Mounting Instructions
Display Unit Installation
The display unit should be mounted where the vehicle operator can easily
view it while backing. The ideal location for this is on the dash positioned by
either windshield pillar. This will allow the operator view of the display while
also looking out one of the side mirrors.
The PreView® display unit comes equipped with a mounting bracket and
hardware. If desired, the display unit can be mounted to the display bracket
with the supplied hardware. This bracket can then be mounted in the
vehicle cab as desired.
The display receives power from the sensor. See installation guide and
supplied manuals for more information.
Summary of Contents for PreView CD6102
Page 11: ......
