rada OnyxCam A-TC02, User Manual

Page: 23 / 48

4. Web interface and settings
4.1 Accessing the Web Interface
To connect the A-TC02 OnyxCam to network, connect an Ethernet cable to its
RJ-45 port and plug it into a switch or router. comes with a static default IP
address 192.168.5.163.
Use an Ethernet cable to connect the camera to network. OnyxCams come with
a static default IP address 192.168.5.163. To change the camera’s IP address,
connect to the camera using a computer and set the computer to be in the same
network as the camera. If you know how to do this, continue to “4.2 Camera Web
Interface”.
If you do not know, then please first make sure that the computer is in the same
network segment as the camera. Thus, computer must also have an IP address
192.168.5.xxx. If you are using Windows, open Settings -> Advanced network
settings -> Change adapter options. In the menu that opens, double-click on your
Ethernet adapter, click on Properties -> Internet Protocol Version 4 and click on
Properties. Select “Use the following IP address” and type in an IP address that
matches the camera’s network segment, for example 192.168.5.160. Click on
the empty field in “Subnet mask” and let it auto-fill to 255.255.255.0. Then press
“OK” to save your settings. You should now be able to access the camera by
typing its IP address 192.168.5.163 in a browser.
This process is demonstrated on the ADENA Limited YouTube channel in video
“26. How to Change the IP Address of your AREC Device”.
4.2 Web Interface Introduction
After you land on the camera’s web page, use the default username and pass-
word “admin” to access it.
There are three pages on the web interface of A-TC02:
• Preview
•
Monocular tracking
• Configuration
After logging in, you will see the camera’s preview. You can control its PTZ from
this page, change focus modes, save and go to presets, and control other
options, including audio and streaming.
22