STARTING THE ENGINE
1.
Place the vehicle on center stand and check that the rear tire is not touching the
ground.
2.
Keep the throttle closed.
3.
Insert the ignition key and turn it to “ON”.
STOPPING THE ENGINE
When the vehicle is stopped with the engine idling turn the ignition key to “OFF” (key
can now be extracted). Use the center stand to support the motorscooter while parked.
Park the motorscooter on firm, level ground to prevent it from falling. Lock the steering
to help prevent theft.
WARNING
Use the engine stop switch only if the engine runs away. It is for emergency use only.
Once the switch is activated, your motorscooter will slow very abruptly. Only in case of
emergency the engine stop switch should be used while the motorscooter is running.
WARNING
Never attempt to place the ignition switch in the locked position while the motorscooter
is moving. This will cause loss of control of the motorscooter with possible subsequent
accident, serious injury or even death.
WARNING
Do not place anything inside the front part of the fairing between the handlebar and
dashboard. Any object placed in this area could jam the forks, and also could restrict
visibility of the dashboard.
WARNING
Never take your hands off the handgrips or your feet off the footrest while you are riding.
Failure to do this could upset the stability of the vehicle.
Before riding away, make sure that the stand is completely up.
Failure to follow these warnings may cause an accident with consequent risk of serious
injury or even death.
10