W W W . R A D P O W E R B I K E S . C O M
6
Recommended Torque Values
Hardware Location
Torque Required (Nm)
Handlebar
18-20
Stem
18-20
Saddle
18-20
Seat
18-20
Rear Wheel
30-35
Bottom Bracket Parts
35-55
Pedals
35
Disk mounting Bolts
6
Disk Caliber Mount
10
Crank Bolts
40
Rear Derailleur Cable Pinch
6
Front Derailleur Clamp
7
Seat Post Clamp
7
Adjusting Seat Height
Use the quick release lever to free the seat post and pull upwards or push downwards to reach
desired height.
Notice:
Ensure seat post and seat are properly adjusted before riding. Do not raise the seat post
beyond the minimum insertion marking etched into the seat post tube. If your seat post projects from the frame beyond these
markings, the seat post or frame may break, which could cause you to lose control and fall. Prior to first use, be sure to tighten
the seat clamp properly. A lose seat clamp or seat post binding bolt can cause damage to the bicycle
or can cause you to lose control or fall. Periodically check to make sure these the seat clamp is
properly tightened.
Rider Comfort
To obtain maximum comfort, the rider should not overextend his or her arms reach when riding. In
order to obtain the most comfortable riding position and offer the best possible pedaling efficiency,
the seat height should be set correctly in relation to the rider’s leg length. The correct saddle height
