10
Step 8:
Review the remainder of the manual
. Once the bike has been assembled per the
above instructions and the assembly video available from
read, understand, and follow the procedures outlined in the remainder of the manual before
operating the bike.
Step 9:
Always check that the battery is locked to the frame
of the RadRover before riding.
The Start-Up Procedure section of this manual has more information on the key positions of
the battery; on and locked to the frame, off and locked to the frame, and off and unlocked
(ready for removal from the frame).
NOTICE:
If you have any questions regarding the assembly of your bike, contact Rad Power Bikes. If you are not able to
ensure all the assembly steps in the assembly video are performed properly, or you are unable to view the assembly
video, please consult a certified, reputable local bike mechanic for assistance in addition to contacting Rad Power Bikes
for help.
NOTICE:
Ensure all hardware is tightened properly following recommended torque values and all safety checks in the
following sections are performed before the first use of the bike.
Do not extend any components including the handlebar stem, seat post, or seat saddle beyond any
minimum insertion marking etched into the components. Ensure that all hardware is properly tightened
(to the values in the Recommended Torque Values table) and components are secured before moving
on to next step otherwise damage to the bike, property, serious injury, or death could occur.
Summary of Contents for RadRover
Page 1: ......
Page 8: ...6 Fully Assembled RadRover...
