W W W . R A D P O W E R B I K E S . C O M
5
Step 3:
Rotate the handlebar stem upwards and clamp the folding stem securely as shown in the assembly video at
www.radpowerbikes.com
Step 4:
Assemble the front wheel onto the front fork if not installed as shown in the assembly video at
www.radpowerbikes.com.
Step 5:
Install the pedals. Use the pedal marked with an “L” on the left side
and the right pedal marked with an “R” on the right side (side with drivetrain
gears). Be careful to not cross thread the pedals. Tighten securely as shown in
the assembly video.
Step 6:
Install the front and rear racks using the included hardware as shown
in the assembly video
Step 7:
Inflate tires to desired PSI. Recommended pressure 20-35 PSI.
Step 8:
Adjust the stem up and down to a comfortable height and secure all
hardware in the stem assembly.
NOTICE: Ensure all hardware is tightened properly and all safety checks in the following sections are performed before first use. Contact Rad Power Bikes if
you have any questions regarding the assembly of your bike. If you are not able to ensure all the assembly steps in the assembly video are performed
properly, or you are unable to view the assembly video please consult a certified local bicycle service provider for assistance in addition to contacting Rad
Power Bikes for help.
Do not extend any components including the stem, rear rack, or seat post beyond the minimum insertion marking etched
into the components. Ensure that all hardware is properly tightened and secured before moving on to next step otherwise
serious injury or death could occur.
