4. Table of Technical Parameters
Tab. 4.1: Table of technical parameters MW160
MW160: 135–175 MHz
Frequency range
200 kHz
Channel spacing
software in range +3.2 MHz from base frequency
Means of setting working frequency
< 1.5 ms
Switching time transmitting/receiving
better than -100 dBm
Receiver sensitivity for BER 10
-3
0.1–5 W
Software adjustable output power
1)
0.1–25 W
133 kbit/s in 200 kHz channel
Max. modulation rate for transmitting
Optional modules
ADIO (analog and digital inputs and outputs)
slot 5
Ethernet 10/100 Mbps
slot 4
2×RS232
slot 3
RS232 or galv. sep. RS232 or RS422/RS485 or GPS
slot 2
slot 1
N
Antenna connector
> 500.000 hours (> 50 years)
MTBF(Mean Time Between Failure)
13.8 V
Supply nominal voltage
10.8–15.6 V
Supply voltage range
420 mA + modules: (Eth. 30 mA, ADIO 50 mA, GPS 15 mA,
SCC 5 mA)
Idle consumption (Rx)
2)
5.5 A / 25 W
Transmission consumption (Tx)
2)
2.5 mA
Consumption in SLEEP mode
-25 to +55 °C
Operating range of temperature
-40 to +85 °C
Storage range of temperature
208×108×63 mm (71 mm DIN rail including)
Mechanical dimensions
184×108×63 mm (short version)
198×65 mm, ø 4.8 mm
Spacing of fastening holes
1.3 kg
Weight
1) Availability of specific types and frequencies check here
1
, please. Presently these types
2
are under
mass production.
2) Approximate values dependent on frequency and modem type.
1
http://www.racom.eu/eng/products/rfp.html
2
http://www.racom.eu/eng/products/radio-modems-mr400.html#specifications
19
© RACOM s.r.o. – Wideband modems – PROFI MW160
Table of Technical Parameters
Summary of Contents for PROFI MW160
Page 2: ......
