Racking Solutions CRCU001 Assembly Instructions Download Page 2

Page: 2 / 2

ASSEMBLY INSTRUCTIONS

STEP 2: SLIP SLEEVES

STEP 1: ASSEMBLING THE FEET LEVELERS

Screw each feet leveler (E) into the bottom of each bottom pole (D).

Turn clock-wise to screw in place. Screw it tightly.

On the Bottom Pole (D), place 1 pair of slip sleeves (B) at the desired level.

Please make sure the arrow faces up and that the word “top” is right side

up. Do this for each Bottom Pole (D) and make sure that the heights are

identical for Bottom Pole (D).
Slide the pair of Slip Sleeves (B) until you hear a click to confirm the pair is

locked onto the Bottom Pole (D).Do not place more than one pair

on each Pole (D) at a time.

*For safety and stability, the lowest SHELF (A) should be lower than the 3rd

notch from the bottom.

**Note: There will be a very small gap in-between the Slip Sleeves (B)-this

is normal.

STEP 3 : INSTALLING BOTTOM SHELF

STEP 4 : INSTALLING TOP POLES

Place Shelf (A) on its side and slide the Bottom Pole (D) through the holes

in the Shelf (A). Make sure that the shelf (A) corner cylinders are

positioned over the Slip sleeves (B).

Stand the unit upright.
*Note : The level side of the Shelf (A) is the Top side(the logo on the

corner cylinders should be right-side up.)

**Use a rubber mallet, if needed, to secure the Shelf (A).

Screw the Top Pole (C) into the Bottom Pole (D). The tops of these poles .
are indicated by the black end up.

STEP 6: FEET LEVELERS

The Feet Levelers (E) are already screwed into the Pole and you can
adjust as needed to ensure your Shelving Rack is level.

STEP 7: FINISH

AND ENJOY YOUR QUALITY

RACKING SOLUTION PRODUCT

STEP 5: INSTALLING REMAINNING SHELVES

On Pole (C+D), place 1 pair of slip sleeves (B) at the desired distance

between Shelves (A). Please make sure the arrow faces up and that the

word “top” is right side up. Do this for each Pole (C+D).and make sure

that the heights are identical for each Pole (C+D).

Lower Shelf (A) over the Top Pole (C) so that the corner cylinders of the

Shelf (A) are positioned over the Slip Sleeves (B).

Repeat Step 4 to install remaining Shelves (A) as desired.

Summary of Contents for CRCU001

Page 1: ...TOOLS REQUIRED Never climb or stand on the shelves Information if in doubt contact the supplier Allow adequate working space and be aware of others working around you Inspect all packages for damage a...

Page 2: ...om Pole D through the holes in the Shelf A Make sure that the shelf A corner cylinders are positioned over the Slip sleeves B Stand the unit upright Note The level side of the Shelf A is the Top side...